Tplink
Media converter TP-Link FC311A-2
Media converter with a gigabit RJ45 port and a gigabit SC fiber connector that converts electrical and optical signals. Long distance data transmission over fiber optics is ideal for commercial scenarios such as Wi-Fi networks and video surveillance in parks.
It supports WDM (wavelength division multiplexing) technology, allowing data to be sent and received over distances of up to 2 km over a single single-mode fiber cable, resulting in significant savings during network deployment. The wavelength is 1310 nm when sending data over fiber and 1550 nm when receiving data. This device can be used without chassis installation.
Main advantages
- One RJ45 10/100/1000 Mb/s port with Auto-Negotiation and Auto-MDI/MDIX support
- Half-duplex and full-duplex switching capability
- Supports WDM technology for sending and receiving data over a single fiber optic cable
- Allows to extend the range of fiber optic cable up to 2 km
| Network | |
| Standards and protocols | IEEE 802.3i, 802.3u, 802.3ab, 802.3z |
| Work environment | |
| Operating temperature | 0˚C - 50˚C (32˚F - 122˚F) |
| Storage temperature | -40˚C - 70˚C (-40˚F - 158˚F) |
| Operating air humidity | 10% - 90% RH, non-condensing |
| Storage humidity | 5% - 90% RH, non-condensing |
| Hardware features | |
| Ports | 1 Gigabit fiber port with SC connector 1 RJ45 10/100/1000 Mbps port (Auto MDI/MDI-X) |
| Network cabling | Single-mode optical fibre UTP cat 5, 5e cable (max. 100 m) |
| Power supply | External power supply: 5 V/0.6 A |
| LEDs | PWR, Link/Act |
| Dimensions (H x W x D) | 94.5 mm × 73.0 mm × 27.0 mm (3.7×2.9×1.1 in) |
| Wave Length | 1550 nm TX, 1310 nm RX |
| Media converter and module | |
| Fiber optic type | Single-mode optical fibre 9/125 μm (≤2 km) |
| Basic technical parameters: | |
| Data transfer rate | 1000 |
| Depth | 73 |
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN data rates | 10,100,1000 |
| Fiber cable diameters supported (core/cladding) | 9/125 |
| Height | 27 |
| Input current | 0.6 |
| Input voltage | 5 |
| Internal | N |
| LED indicators | Y |
| Maximum data transfer rate | 1000 |
| Maximum transfer distance | 100 |
| Networking standards | IEEE 802.3ab,IEEE 802.3i,IEEE 802.3u,IEEE 802.3z |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | 0 - 50 |
| Product colour | Black |
| Quick installation guide | Y |
| Storage relative humidity (H-H) | 5 - 90 |
| Storage temperature (T-T) | -40 - 70 |
| Width | 94.5 |
njoy Wi-Fi like never before
Deco is the easiest way to get a strong wireless signal in every corner of your home. Two Deco units cover up to 370m². Wireless connections and optional Ethernet backup connect the Deco units, providing an even faster network and the most smooth roaming that offers the best connection when you walk around the house without interrupting the transfer. Need more Wi-Fi coverage? Just add another Deco unit.
Increase your wifi range
.
3in1: Router, access point and network amplifier
The multifunctional Deco M4 can be used as a router, access point and network amplifier. Create a private Wireless network or create Wi-Fi access for everyone wired networks. Choose . Optimal mode on the fly and enjoy maximum network flexibility.
Say goodbye to caching
With 802.11ac technology and speeds up to three times faster than older generations of routers, Deco can provide a fast connection without delay even for 100 devices.
The end of dead zones Wi-fi
Eliminate dead zones throughout the house with Wi-fi from fluid roaming, adaptive routing and automatically repairing connections. You will never have to look for a wireless signal regardless of this again, whether you're in the basement, garage or backyard. Technology TP-Link Mesh dynamic selects the best possible route and band for your data, guaranteeing fast a connection anywhere in the house.
Quickly. Steady. All over. - Home WiFi system Mesh
| Power supply | |
| Input voltage of the power supply | 100-240V ~ 50/60Hz 0.4A |
| Power supply output voltage | 12V ⎓ 1,2A |
| Equipment features | |
| Processor | Qualcomm |
| Ports | 2 Gigabit Ethernet (WAN/LAN auto-sensing) ports per Deco device |
| Buttons | 1 reset button on the bottom |
| Power supply | 12 V/1,2 A |
| Dimensions | Φ90,7 mm x 190 mm (Φ3,6 inch x 7,5 inch) |
| Antenna type | 2 indoor dual-band antennas per Deco device |
| Wireless transmission characteristics | |
| Wireless standards | IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz |
| Frequency of operation | 2.4 GHz and 5 GHz |
| Transmission speed | 300Mbps in the 2.4 GHz band 867Mbps in the 5 GHz band |
| EIRP | FCC: <30 dBm CE: <20 dBm (2.4 GHz) <23 dBm (5 GHz) |
| Wireless transmission security | WPA-PSK/WPA2-PSK |
| Advanced features | ● Router/access point mode Optional Ethernet backup link Guest network ● TP-Link Mesh technology: MU-MIMO Automatic route selection Automatic repair AP control Band control Beamforming |
| Software functions | |
| Quality of Service function | WMM |
| IPv6 | Yes |
| WAN | Dynamic IP/Static IP/PPPoE/L2TP/PPTP |
| Management | Local management, Remote management |
| DHCP | Server, client |
| Port forwarding | Yes |
| Access control | Black list |
| Firewall protections | Firewall SPI |
| Protocols | IPv4 and IPv6 |
| Advanced features | Parental control QoS |
| Advanced features | Monthly reports Automatic software update Possibility of extending the network with additional Deco units |
| Guest Network function | 1 2.4 GHz network 1 5 GHz network |
| Beamforming | Yes |
| APP | Easy configuration with Deco application |
| Other | |
| Certificates | CE, FCC, IC, NCC, BSMI, IDA, RCM, JPA, JRF, VCCI, KC, RoHS |
| Package contents | ● Deco M4 (3 devices): 3 Deco units 1 RJ45 Ethernet cable 3 power supplies 1 Quick Installation Guide ● Deco M4 (2 devices): 2 Deco units 1 RJ45 Ethernet cable 2 power supplies 1 Quick Installation Guide ● Deco M4 (1 device): 1 unit Deco 1 RJ45 Ethernet cable 1 power supply 1 Quick Installation Guide |
| System requirements | iOS 9.0 or newer Android 4.3 or newer |
| Working environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉) Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~90%, non-condensing |
Wireless network signal amplification
Are you tired of weak Wi-Fi signal? The TP-Link range extender will let you easily solve this problem. With the TL-WA850RE you will be able to enjoy a fast and stable wireless connection throughout your home.
Trouble-free installation
Now you can easily extend your Wi-Fi range without any additional cables, all you have to do is place the TL-WA850RE in range of your existing wireless network. Simply press the WPS button on the router, then Range Extender on the amplifier and ... Done!
| Equipment features | |
| Plug type | EU |
| Ports | 1 x 10/100M Ethernet port (RJ45) |
| Buttons | RE (Range Extender) button, reset button |
| Power consumption | ~ 3 W |
| Wireless standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Dimensions (S x G x W) | 110,0 mm x 65,8 mm x 75,2 mm (4,3″ x 2,6″ x 3,0″) |
| Antenna | 2 internal antennas |
| Wireless transmission characteristics | |
| Frequency of operation | 2.4~2.4835 GHz |
| Transmission speed | 11n: up to 300 Mb/s (dynamic) 11g: up to 54 Mb/s (dynamic) 11b: up to 11 Mb/s (dynamic) |
| Receiver sensitivity | 270 M: -68 dBm @ 10% PER 130 M: -68 dBm @ 10% PER 108 M: -68 dBm @ 10% PER 54 M: -68 dBm @ 10% PER 11 M: -85 dBm @ 8% PER 6 M: -88 dBm @ 10% PER 1 M: -90 dBm @ 8% PER |
| EIRP | < 20 dBm (EIRP) |
| Wireless modes of operation | Signal amplifier/access point |
| Wireless transmission functions | WMM (Wi-Fi multimedia) Filtering of MAC addresses Wireless transmission statistics Logging in with a domain name |
| Wireless transmission security | 64/128/152-bit WEP, WPA-PSK/WPA2-PSK |
| Other | |
| Certificates | CE, RoHS |
| Package contents | TL-WA850RE Quick Installation Guide |
| System requirements | Microsoft® Windows® 98SE, NT, 2000, XP, Vista or Windows 7, 8, 10, Mac® OS, NetWare®, UNIX® or Linux. |
| Working environment | Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℃~70℃ (-40℉~158℉) Operating air humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensable |
Strengthen your wireless signal
Tired of a weak Wi-Fi signal? TP-Link's range extender provides an easy solution.
With TL-WA854RE v3, you will be able to enjoy a fast and stable wireless connection throughout your home.
| Hardware features | |
| Buttons | RE (Range Extender) button Reset button |
| Power consumption | 3,3 W |
| Dimensions (H x W x D) | 65.8 mm × 75.2 mm × 110 mm |
| Antenna | 2 internal antennas |
| Wireless transmission characteristics | |
| Wireless standards | IEEE 802.11b/g/n |
| Transmission speed | 300 Mbps in the 2.4 GHz band |
| Operating frequency | 2.4 GHz |
| Receiver sensitivity | 2.4 GHz: 11g 54 Mbps: -80 dBm, 11n HT20 MCS7: -79 dBm 11n HT40 MCS7: -76 dBm |
| EIRP | CE: <15 dBm |
| Wireless transmission functions | Wireless network on/off Power schedule |
| Wireless security | 64/128-bit WEP encryption, WPA-PSK / WPA2-PSK |
| Other | |
| Certificates | CE, RoHS |
| Contents of the package | TL-WA854RE Quick Installation Guide |
| System requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, 10, MAC OS, NetWare, UNIX or Linux Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0 or other browser with Java support |
AX1500 Universal Wireless Network Amplifier
TP-Link RE505X is a relatively compact repeater designed for convenient extension of wireless network. The device has been designed in a practical housing and can be plugged directly into an outlet. The signal repeater supports new wireless technology Wi-FI 6, which ensures high speed and efficiency. Operating in the 2.4GHz and 5GHz bands, the accessory offers many advantages when working with multiple devices and tasks. With OneMesh, you can create one seamless network throughout your home.
State-of-the-art Wi-Fi 6
The latest WI-Fi technology eliminates annoying delays, endless charging and dead spots. Enjoy a future of faster network charging and more connections.
Adaptive path selection RE505X
The device ensures maximum network speed by automatically selecting the fastest path to connect to the router.
High speed mode
Use both Wi-Fi bands to enjoy super-fast connections - perfect for HD streaming and gaming.
Built-in access point mode
RE505X is more than just a wireless range extender. Simply plug an Ethernet cable into the port to easily turn your wired connection into a high-speed dual-band wireless signal.
TP-Link OneMesh
OneMeshTM is an easy way to create a Mesh network with a single Wi-Fi name, providing seamless coverage throughout your home. Simply connect a range extender to your OneMeshTM router . No more searching for a stable connection.
| Technical data: | |
| Ports | 1 Gigabit Ethernet port |
| Buttons | WPS, Reset |
| Power consumption | 10 W |
| Dimensions (H x W x D) | 74.0 × 46 × 124.8 mm (2.9 × 1.8 × 4.9 inches) |
| Antenna | 2 external antennas |
| Wireless transmission characteristics | |
| Wireless standards | IEEE 802.11a/n/ac/ax 5 GHz, IEEE 802.11b/g/n 2.4 GHz |
| Operating frequency | 2.4 GHz and 5 GHz |
| Transmission speed | 300 Mbps in the 2.4 GHz band, 1200 Mbps in the 5 GHz band |
| Receiver sensitivity | 5 GHz: 11a 6 Mbps: -93dBm, 11a 54 Mb/s: -75dBm 11ac HT20 MCS0: -92dBm, 11ac HT20 MCS8: -70dBm 11ac HT40 MCS0: -90dBm, 11ac HT40 MCS9: -66dBm 11ac HT80 MCS0: -87dBm, 11ac HT80 MCS9: -62dBm 2.4GHz: 11g 54 Mbps: -77dBm, 11n HT20 MCS7: -75dBm 11n HT40 MCS7: -72dBm |
| EIRP | CE: 2.4 GHz ≤ 20 dBm, 5 GHz ≤ 30 dBm |
| Wireless transmission functions | Wireless network on/off, wireless network statistics |
| Security of wireless transmission | 64/128-bit WEP, WPA/WPA-PSK2 encryption |
Enjoy Wi-Fi like never before
Deco is the easiest way to get a strong wireless signal in every corner of your home. Two Deco units cover up to 370m². Wireless and optional Ethernet backup connectivity connects the Deco units for an even faster network and the smoothest roaming that offers the best connection when you walk around the house without interrupting transfer. Need more Wi-Fi coverage? Just add another Deco unit.
Increase your wifi range
.
3in1: Router, access point and network amplifier
The multifunctional Deco M4 device can be used as a router, access point and network amplifier. Create a private one in no time. Wireless network or create Wi-Fi access for everyone wired networks. Choose . Optimal mode on the fly and enjoy maximum network flexibility.
Say goodbye to caching
With 802.11ac technology and speeds up to three times faster than older generations of routers, Deco can provide fast, lag-free connections for up to 100 devices.
The end of dead zones Wi-fi
Eliminate dead zones throughout your home with Wi-fi from seamless roaming, adaptive routing and automatic repair of connections. You'll never have to look for a wireless signal regardless of this again, whether you're in the basement, garage or backyard. TP-Link Mesh technology dynamically selects the best possible route and band for your data, guaranteeing fast a connection anywhere in the house.
Quickly. Steady. All over. - Home WiFi system Mesh
| Power supply | |
| Input voltage of the power supply | 100-240V ~ 50/60Hz 0.4A |
| Power supply output voltage | 12V ⎓ 1,2A |
| Equipment features | |
| Processor | Qualcomm |
| Ports | 2 Gigabit Ethernet (WAN/LAN auto-sensing) ports per Deco device |
| Buttons | 1 reset button on the bottom |
| Power supply | 12 V/1,2 A |
| Dimensions | Φ90,7 mm x 190 mm (Φ3,6 inch x 7,5 inch) |
| Antenna type | 2 indoor dual-band antennas per Deco device |
| Wireless transmission characteristics | |
| Wireless standards | IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz |
| Frequency of operation | 2.4 GHz and 5 GHz |
| Transmission speed | 300Mbps in the 2.4 GHz band 867Mbps in the 5 GHz band |
| EIRP | FCC: <30 dBm CE: <20 dBm (2,4 GHz) <23 dBm (5 GHz) |
| Wireless transmission security | WPA-PSK/WPA2-PSK |
| Advanced features | ● Router/access point mode Optional Ethernet backup link Guest network ● TP-Link Mesh technology: MU-MIMO Automatic route selection Automatic repair AP control Band control Beamforming |
| Software functions | |
| Quality of Service function | WMM |
| IPv6 | Yes |
| WAN | Dynamic IP/Static IP/PPPoE/L2TP/PPTP |
| Management | Local management, Remote management |
| DHCP | Server, client |
| Port forwarding | Yes |
| Access control | Black list |
| Firewall protections | Firewall SPI |
| Protocols | IPv4 and IPv6 |
| Advanced features | Parental control QoS |
| Advanced features | Monthly reports Automatic software update Possibility of extending the network with additional Deco units |
| Guest Network function | 1 2.4 GHz network 1 5 GHz network |
| Beamforming | Yes |
| APP | Easy configuration with Deco application |
| Other | |
| Certificates | CE, FCC, IC, NCC, BSMI, IDA, RCM, JPA, JRF, VCCI, KC, RoHS |
| Package contents | ● Deco M4 (3 devices): 3 Deco units 1 RJ45 Ethernet cable 3 power supplies 1 Quick Installation Guide ● Deco M4 (2 devices): 2 Deco units 1 RJ45 Ethernet cable 2 power supplies 1 Quick Installation Guide ● Deco M4 (1 device): 1 unit Deco 1 RJ45 Ethernet cable 1 power supply 1 Quick Installation Guide |
| System requirements | iOS 9.0 or newer Android 4.3 or newer |
| Working environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉) Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~90%, non-condensing |
Deco E4 - Dual band Mesh Wi-Fi to your home
Deco is the easiest way to guarantee a strong Wi-Fi signal in every corner of your home. This system will provide you with a fast and stable WiFi connection for all your devices in any room of the house. If you're tired of delays in downloading files or losing your Internet connection, Deco E4 will provide you with a simple but sophisticated way to get Wi-Fi coverage without any problems. This home mesh system supports wireless speeds up to three times faster than previous generation routers and can support up to 100 Wi-Fi devices. The Deco units work together as one unified network, so you can enjoy higher speeds throughout your home without having to jump between networks.
Eliminate weak signal areas once and for all
A system of two units can cover an area of up to 260 m2. It doesn't matter what your house is. Enjoy uninterrupted connections no matter where you are in the house. And if you need more, just add another Deco router to your network.
Forget about the long caching!
The MESH system has a significant advantage - devices automatically connect to the fastest Deco unit in your home. Move freely around the house and always have the perfect signal. Your terminal device will connect to your Deco router, which at any given moment sends the best WIFI signal. This ensures that no matter where you are at home, you will always enjoy an uninterrupted high speed internet connection. Whether you operate in the 2.4 GHz or 5 GHz band, the system will always select the correct frequency on your device.
Three times the network speed
Deco E4 offers up to three times the network speed of the previous generation of routers, using 802.11ac technology and two bands to work. In the 5 GHz band it reaches 867 Mbps, in the 2.4 GHz band - 300 Mbps. The unit can connect up to 100 devices without speed limit. This solution ensures smooth gaming and video playback in 4K.
Wi-Fi Mesh system easy to configure and expand
Installation of TP-Link Deco E4 Mesh system is very simple. Just install the TP-Link Deco application and carefully follow the instructions displayed on the screen. After a few minutes your network will be up and running. You can also add more Deco units via the application to extend your range. . You can extend the range of your Mesh WiFi network at any time - just connect another Deco router.
| Power | |
| Mains adapter input | 100-240V ~ 50 / 60Hz 0.3A |
| Output of the power supply | 12V ⎓ 1A |
| Equipment features | |
| Ports | 2 WAN / LAN ports 10 / 100Mb / s, 1 power port |
| Button | 1 reset button on the bottom |
| Flash | 16 MB |
| SDRAM | 128 MB |
| Dimensions | 7,5 × 3,6 × 3,6 inches (190,5 × 90,7 × 90,7 mm) |
| Antenna type | 2 indoor dual-band antennas per Deco unit |
| Wireless functions | |
| Wireless standards | IEEE 802.11 ac / n / a 5 GHz, IEEE 802.11 b / g / n 2.4 GHz |
| Frequency | 2.4 GHz and 5 GHz |
| Signal speed | 867 Mbps in the 5 GHz band, 300 Mbps in the 2.4 GHz band |
| Transmission power | FCC: <30 dBm, CE: <20 dBm (2,4 GHz), <23 dBm (5 GHz) |
| Wireless protection | WPA-PSK / WPA2-PSK |
| Software features | |
| Quality of service | WMM |
| Type WAN | Dynamic IP / Static IP / PPPoE / L2TP / PPTP |
| Management | Local, remote management |
| DHCP | Server, client |
| Barrage safety | Dam SPI |
| Protocols | Supports IPv4 and IPv6 |
| Guest network | 2.4 GHz x 1 guest network 5 GHz x 1 guest network |
| Modes of operation | Router, access point |
| Other | |
| Case law | CE, FCC, IC, NCC, BSMI, IDA, RCM, JPA, JRF, VCCI, KC, RoHS |
| Package contents | 3 deco units 3 power supplies 1 RJ45 Ethernet cable |
| Smartphone/tablet requirements | iOS 9.0 or higher, Android 4.4 or higher |
| Environment | Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℉~70℃ (-40℉~158℉) Opearting humidity: 10%~90% non-condensing Storage humidity: 5%~90% non-condensing |
Deco E4 - Dual-band Wi-Fi Mesh System for Your Home
Deco is the easiest way to guarantee a strong Wi-Fi signal in every corner of your home. This system will provide you with a fast and stable WiFi connection for a whole host of devices in any room of the house. If you're tired of lagging downloads or losing your internet connection, Deco E4 will provide you with a simple yet sophisticated way to get seamless Wi-Fi coverage. This home mesh system supports wireless speeds up to three times faster than previous generation routers and can support up to 100 Wi-Fi devices. The Deco units work together as one unified network, so you can enjoy faster speeds throughout your home without having to jump between networks.
Eliminate weak signal areas once and for all
The two-unit system can cover an area of up to 260 m2. It doesn't matter what your home is like. Enjoy uninterrupted connections no matter which part of the house you're in. And if you need more, simply add another Deco router to your network.
Move freely around your house!
The MESH system has a significant advantage - the devices automatically connect to the fastest Deco unit in your home. Move freely around your home and always have a perfect signal. Your end device will connect to the Deco router that is currently sending the best WIFI signal. This ensures that no matter where you are in the house, you will always enjoy an uninterrupted high-speed internet connection. Whether you are operating in the 2.4 GHz or 5 GHz band, the system will always select the correct frequency on your device.
Triple the network speed
The Deco E4 offers network speeds up to three times faster than the previous generation of routers by using 802.11ac technology and two bands for operation. In the 5 GHz band it reaches speeds of 867 Mbps, in the 2.4 GHz band it is 300 Mbps. Up to 100 devices can be connected to the unit without speed limit. Such a solution ensures smooth gaming and video playback in 4K.
Wi-Fi Mesh System easy to configure for expansion
Installing the TP-Link Deco E4 Mesh system is very simple. Just install the TP-Link Deco application and carefully follow the on-screen instructions. After a few minutes, your network will be up and running. You can also add more Deco units through the app to extend your coverage. . You can extend the range of your Mesh WiFi network at any time - just plug in another Deco router.
| Power | |
| AC adapter input | 100-240V ~ 50/60Hz 0,3A |
| Power supply output | 12V ⎓ 1A |
| Hardware features | |
| Ports | 2 10/100Mb/s WAN/LAN ports , 1 power port |
| Button | 1 reset button on the bottom |
| Flash | 16 MB |
| SDRAM | 128 MB |
| Dimensions | 7.5 × 3.6 × 3.6 inches (190.5 × 90.7 × 90.7 mm) |
| Antenna type | 2 internal dual-band antennas per Deco unit |
| Wireless functions | |
| Wireless standards | IEEE 802.11 ac / n / a 5 GHz, IEEE 802.11 b / g / n 2.4 GHz |
| Frequency | 2.4 GHz and 5 GHz |
| Signal speed | 867 Mbps in the 5 GHz band, 300 Mbps in the 2.4 GHz band |
| Transmission power | FCC: <30 dBm, CE: <20 dBm (2,4 GHz), <23 dBm (5 GHz) |
| Wireless protection | WPA-PSK / WPA2-PSK |
| Software features | |
| Quality of service | WMM |
| WAN type | Dynamic IP / Static IP / PPPoE / L2TP / PPTP |
| Management | Local management, remote management |
| DHCP | Server, client |
| Firewall security | SPI firewall |
| Protocols | Supports IPv4 and IPv6 |
| Guest network | 2.4 GHz guest network x 1 5 GHz guest network x 1 |
| Operating modes | Router, access point |
| Other | |
| Case law | CE, FCC, IC, NCC, BSMI, IDA, RCM, JPA, JRF, VCCI, KC, RoHS |
| Packaging Content | 3 deco units 3 power supplies 1 RJ45 Ethernet cable |
| Smartphone / tablet requirements | iOS 9.0 or later, Android 4.4 or later |
| Environment | Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℉~70℃ (-40℉~158℉) Operating humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
- 1