Fiber optic

FC-6S FTTH 125um is a mechanical tool that is used to cut 125um single-mode optical fiber. Cutting the fiber optic cable is necessary to prepare it for welding or other work.

Extralink AI-8C is a novelty in the market of fiber optic welders. The device is available at an attractive price, offering advanced technology for positioning and welding fiber optics. The comfort of working with this device will be appreciated by both novice users as well as advanced and experienced installers. Quality and reliability of the welder has been confirmed by a number of tests carried out in different environmental conditions and on different types of fibres. The characteristic feature of this manufacturer's welders is the use of smartphones for their configuration, archiving data about the welds performed and diagnostics. Extralink's products have found recognition in markets all over the world, and the high quality of the offered products can be proved by the warranty policy, which takes into account the replacement of the device with new ones after 50 000 welds have been made.

Specyfication Basic technical parameters: Number of wheels 1 Product colour Blue, Yellow Rod diameter 4.5 Rod length 75 Rod material Fibreglass

Media converter with a gigabit RJ45 port and a gigabit SC fiber connector that converts electrical and optical signals. Long distance data transmission over fiber optics is ideal for commercial scenarios such as Wi-Fi networks and video surveillance in parks.

Introducing the Extralink OTDR Fiber Optic Fault Locator, the best solution for fast and accurate identification of faults in fiber optic networks. This powerful device uses Optical Time Domain Reflectometry (OTDR) technology to send a pulse of light through an optical fiber and measure the reflected signal. It then analyzes the data to indicate the location and severity of any problems, such as breaks, bends or loss of signal strength.

Extralink AI-9 is an innovative solution on the market of fiber optic welders. It combines simplicity of use, which will be appreciated by novice users, and advanced positioning and welding techniques, which will be appreciated by experienced welders. The welder operates on different types of fibers, both Singlemode and Multimode. AI series welders stand out in the market with an innovative way of device configuration - all settings are made via an application installed on the smartphone.

The fiber optic tool kit contains items that are essential for the installer's work. These basic tools allow you to prepare the fiber for the splicing process and to check the connection after splicing.

Fiber Fault Checker is a device with which you can check single and multi-mode optical fibers very efficiently. It is connected to the fiber optic cable through a fiber optic connector. The red laser can be used as a reference point and to locate the point where the fiber optic cable has failed, which the OTDR cannot find, and the area of high bending losses.

The CFS-3 stripper is designed to prepare fiber optic cable before welding, to remove 250µm buffer coating from 125µm fiber optic cable, as well as 2-3mm protective sheaths. A 140µm diameter hole and V-shaped groove in the working part of the tool are used to remove 250µm buffer coating from 125µm diameter optical fiber.

Patchcord SC/UPC-SC/UPC SM SIMPLEX 3.0MM 3M This single-mode patchcord with a length of 3 meters and a cable diameter of 3 mm, terminated with SC/UPC-SC/UPC connectors is used to connect network optical equipment such as switches or converters. Patchcords are also widely used in FTTH networks to connect OLT and ONU/ONT type devices.

Pocket knife for cutting optic fibre cables The tool can work on cables from 4.5 to 11mm in diameter: - 4.5 mm - 6mm - 7mm - 8mm - 11mm

Extralink Stripper - S | Buffer puller | for cable, small 1.5mm - 3.3mm Stripper is a powerful and indispensable tool for terminating fiber optic cables. It easily cuts the sheath of a PVC cable into two parts before crimping. In both field and plant applications, this precise and innovative tool saves time and ensures consistency.

EXTRALINK CLEANER CASSETTE CLE-BOX Fiber optic connector cleaning cartridge. Contains a special microfiber cleaning tape for dry (alcohol free) ferrule fronts. Cleans very thoroughly while maintaining antistatic properties.

Extralink FXPB-1 | Cable drum roller | up to 200kg load

Extralink fiber optic connector cleaning tool Extralink WUN014 is a fiber optic connector cleaning tool for cleaning the ferrule face. Special fabric removes any dirt and its antistatic properties prevent dust from settling again. The tool is used to clean connectors of both patchpanels and individually mounted adapters.

Basic technical parameters: Protective insulation Y Stripping capacity (max) 1 Stripping capacity (min) 4

Optix Aramid Z-XOTKtcdD 12J is a lightweight cable with a single-tube construction characterized by high flexibility and resistance despite its small diameter. The cable is filled with hydrophobic gel to protect against moisture and vibration. Aramid fibers were used for additional structural reinforcement. Two ARP or FRP rods were embedded in the outer HDPE layer. Ripcords allow for easy shell removal. Features For overhead/sewer installation Installation on spans (NESC Heavy) up to 80 meters Fully dielectric design Resistance to low and high temperatures Reinforcement with high-quality aramid fibers Robust HDPE shell

Specyfication Basic technical parameters: Protective insulation Y Stripping capacity (max) 2.8 Stripping capacity (min) 8