Extralink
FC-6S FTTH 125um
FC-6S FTTH 125um is a mechanical tool that is used to cut 125um single-mode optical fiber. Cutting the fiber optic cable is necessary to prepare it for welding or other work.
High-quality AI-8C fibre-optic welder
Extralink AI-8C is a novelty in the market of fiber optic welders. The device is available at an attractive price, offering advanced technology for positioning and welding fiber optics. The comfort of working with this device will be appreciated by both novice users as well as advanced and experienced installers. Quality and reliability of the welder has been confirmed by a number of tests carried out in different environmental conditions and on different types of fibres. The characteristic feature of this manufacturer's welders is the use of smartphones for their configuration, archiving data about the welds performed and diagnostics. Extralink's products have found recognition in markets all over the world, and the high quality of the offered products can be proved by the warranty policy, which takes into account the replacement of the device with new ones after 50 000 welds have been made.
Precise positioning to the core and fast workflow
Extralink AI-8C uses a positioning technique to the core (possibility of positioning to the mantle), guaranteeing the best attenuation parameters of the welds performed. As many as 6 high class (Siemens) motors position the fibres, which is absolutely unparalleled in devices from this price shelf. The range of applications is wide, because the welder can be used for both 100-kilometer fiber optic bus, FTTH installation, as well as short point-to-point connections, LAN installations or for video surveillance based on fiber optic cabling. The AI-8C model is based on a 4-core processor, providing a fast response time (the device is ready to work after 3 seconds) and short welding and shielding times. The AI-8C welding machine is one of the fastest devices of this type currently available on the market, and the fastest in this price class.
Comfortable work in all lighting conditions
The 5.1-inch display with a resolution of 800 x 480 px, with adjustable brightness, ensures comfortable operation even in difficult lighting conditions. The optical system offers a 300-fold image magnification, which directly translates into the quality and precision of the welding process and visual analysis of the welds performed (viewing in two planes). The minimum welding time is 6 seconds and welding time of 40 mm covers is only 15 seconds. Built-in LED lamp allows to perform welds and work with fibers even in total darkness.
Universal fibre holders
Universal fibre holders provide comfort and speed of work. In these holders it is possible to lay 250 μm, 900 μm, in a tight and loose tube, as well as patchcord or DROP type cables. The welding machine offers various welding programs and an automatic mode, which works well during most of the work.
Robust and practical welding kit
The casing of the welding machine is made of metal with the bottom covered with protective rubber, while the casing of the welding chamber and the furnace are made of high-quality plastic. The offered set includes the AI-8C welding machine and practical box, which includes all necessary tools and power supply. The accessories are placed in a two-level drawer mounted on durable metal guides. It is not necessary to remove the welder from the box during welding, it can serve as a solid and stable support as it is made of durable plastic. The box also has a detachable element which can be used as a stool or small table.
Capacious and quick to charge battery
The welder is equipped with a battery with a capacity of 7800 mAh. It provides about 200 welds and shielding welding cycles. Battery charging time is only 3.5 h. The design of the welder allows for very quick replacement of the battery, pressing the button on the casing causes it to slide out. It is possible to buy a spare battery.
Special features
- 6 motors for fibre positioning
- Positioning for fibre core or jacket
- Automatic mode of operation (AUTO) possible
- Image magnification x 300
- 4-core processor for fast operation
- Minimum welding time of 6 seconds
- High-speed stove - welding of the 40 mm weld guard takes only 15 s
- Configuration via phone application (Android/iOS)
- Large (5.1'') display with adjustable volume
- Possibility to create welding reports using a dedicated application (export to xls)
- Metal housing covered on the underside with rubber
- Built-in LED lamp
- Capacious (7800 mAh), replaceable battery for approximately 200 welding and sealing cycles
- Battery charging time - about 3.5 h
- USB connector for charging your smartphone
- Universal fibre holders
- High quality, practical box
- Rich set of accessories
- Single-mode (SM), multimode (MM), DS, NZDS support
Specification
Basic technical parameters | |
Positioning method | Positioning for fibre core or jacket |
Average welding time | 6 s |
Average welding time (40 mm) | 15 s |
Number of engines | 6 |
Compatibility with fibres | SM (G.652, G.657), MM (G.651 - OM1, OM2, OM3, OM4), DS, NZDS (G.655) |
Average insertion losses | 0.025 dB (SM), 0.01 dB (MM), 0.04 dB (DS/NZDS) |
Reflective losses | Min. 60 dB |
Electrode life | 3000 cycles |
Tensile test | 2 N |
Display | 5.1-inch Resolution 800 x 480 px Adjustable brightness |
Enlarged | x 300 in the X or Y axis; x 150 in both axes simultaneously |
Battery | 7800 mAh Charging time 3.5 h |
Case | Metal, rubber-coated underneath |
Dimensions | Welding machine: 130 x 122 x 148 mm Toolbox: 270 x 237 x 293 mm |
Weight | 2.08 kg - battery operated welder 7.1 kg - whole set |
Working temperature | -15°C~50°C |
Working humidity | < 95%, non-condensing |
Basic technical parameters: | |
Number of wheels | 1 |
Product colour | Blue, Yellow |
Rod diameter | 4.5 |
Rod length | 75 |
Rod material | Fibreglass |
Lightweight optical reflectometer for field use by Extralink
Introducing the Extralink OTDR Fiber Optic Fault Locator, the best solution for fast and accurate identification of faults in fiber optic networks. This powerful device uses Optical Time Domain Reflectometry (OTDR) technology to send a pulse of light through an optical fiber and measure the reflected signal. It then analyzes the data to indicate the location and severity of any problems, such as breaks, bends or loss of signal strength.
Key features of the Extralink SUR190-S
Intuitive interface
The OTDR Fiber Optic Fault Locator is easy to use, with a simple interface that displays results in real time. It also has a display and a range of options for customizing test parameters, so you can tailor the device to your specific needs.
Ideal for technicians as well as engineers
With a lightweight and rugged design, the OTDR Fiber Optic Fault Locator is ideal for use in the field or laboratory. It can be used to troubleshoot single-mode fiber optic networks. The Extralink SUR190-S is a versatile tool for both technicians and engineers.
An essential tool for anyone working with fiber optic networks
Extralink's OTDR Fiber Optic Fault Locator is an essential tool for anyone working with fiber optic networks. It provides fast, accurate results that can save time and money by quickly identifying and resolving problems.
Technical data | |
Model | SUR190-s |
Wavelength | 1310nm (1550nm optional) |
Fiber type | 9/125um Single-mode |
Connector type | FC/PC/; SC/PC |
Sensor type | InGaAs |
Peak laser power | >=60mW |
Range | up to 60 km |
Unit of measurement | meters |
Dead zone of the rebound event | 15 m |
Dead zone of the suppression event | 300 m |
Accuracy Distance (Reflection Event) | ABOUT _(1m 2 *10(-4)* distance). |
VFL power | >=1mW |
Power supply | 4.2V Li-ion battery |
Battery life | >=5000 measurements |
Temperature | Operational -5°C ~ 40°C Storage -10°C ~ 60°C |
Moisture | 0 ~ 85% (non-condensing) |
Weight | 300 g |
High-quality AI-9 fiber optic welding machine
Extralink AI-9 is an innovative solution on the market of fiber optic welders. It combines simplicity of use, which will be appreciated by novice users, and advanced positioning and welding techniques, which will be appreciated by experienced welders. The welder operates on different types of fibers, both Singlemode and Multimode. AI series welders stand out in the market with an innovative way of device configuration - all settings are made via an application installed on the smartphone.
Precise positioning to the core and high speed
Extralink AI-9 uses a stick positioning technique for the core (mantle positioning possible) to provide the best damping parameters for the welds. Fibers are positioned by 6 high-end (Siemens) motors, which is absolutely unparalleled in equipment from this price shelf. The welder can be used both for 100 km of fiber optic buses, FTTH installations, as well as short point-to-point connections, or LAN installations or video surveillance based on fiber optic cabling. The AI-9 model is based on a 4-core processor ensuring fast response time (the welder is ready to work after 3 seconds) and short welding and shielding times. This welding machine is one of the fastest devices of this type currently available on the market and the fastest in this price class.
Comfortable work in any lighting
5.1-inch display with 800x480 px resolution and adjustable brightness ensures comfortable operation even in difficult lighting conditions. The optical system offers 300-fold image magnification, which directly affects the quality of the welding process and visual analysis of the welds performed (viewing in two planes). The minimum welding time is 6 seconds and welding time of 40 mm covers is only 15 seconds. Built-in LED lamp allows to perform welds (and fiber work) even in total darkness.
Universal fibre holders
Universal fibre holders provide comfort and speed of work - 250 μm, 900 μm fibres can be laid in a tight and loose tube and patchcord and/or DROP type cables. The welder offers various welding programs and an Auto mode, which works in most situations.
Robust and practical welding kit
The casing of the welding machine is made of metal, covered with protective rubber on the underside, the cover of the welding chamber and the furnace are made of high quality plastic. The offered set includes a practical box containing, apart from the welder, all necessary tools, power supply and accessories (retractable in a two-level drawer mounted on durable metal guides). What is important is that it is not necessary to take the welder out of the box for welding - so we get a solid and stable support. The box itself is made of durable plastic and has a inseparable element which can be used as a stool or small table.
Specification
Basic technical parameters | |
Positioning method | Positioning for fibre core or jacket |
Average welding time | 6s |
Average welding time (40mm) | 15s |
Number of engines | 6 |
Compatibility with fibres | SM (G.652, G.657), MM (G.651 - OM1, OM2, OM3, OM4), DS, NZDS (G.655) |
Average insertion losses | 0.025 dB (SM), 0.01 dB (MM), 0.04 dB (DS/NZDS) |
Reflective losses | min 60 dB |
Electrode life | 3000 cycles |
Tensile test | 2N |
Display | 5.1-inch Resolution 800x480 px Adjustable brightness |
Enlarged | x300 (in the X or Y axis; x150 in both axes simultaneously) |
Battery | 7800 mAh Charging time 3.5h |
Case | Metal, rubber-coated underneath |
Dimensions | welder: 130 x 122 x 148 mm toolbox: 270 x 237 x 293 mm |
Weight | 2.08 kg (welder with battery) 7.1 kg (whole set) |
Working temperature | -15°C~ 50°C |
Working humidity | < 95% (no condensation) |
Extralink FTTH Fiber Optic Toolkit
The fiber optic tool kit contains items that are essential for the installer's work. These basic tools allow you to prepare the fiber for the splicing process and to check the connection after splicing.
Extralink CFS-3
The CFS-3 stripper is designed to prepare fiber optic cable before welding, to remove 250µm buffer coating from 125µm fiber optic cable, as well as 2-3mm protective sheaths. A 140µm diameter hole and V-shaped groove in the working part of the tool are used to remove 250µm buffer coating from 125µm diameter optical fiber.
Features of the CFS-3 optical stripper
- The tool does not require adjustment
- No scratches or scrapes on the fiber optic cable.
- The tool is equipped with a locking latch to lock in place
Extralink CFS-3
The CFS-3 stripper is designed to prepare fiber optic cable before welding, to remove 250µm buffer coating from 125µm fiber optic cable, as well as 2-3mm protective sheaths. A 140µm diameter hole and V-shaped groove in the working part of the tool are used to remove 250µm buffer coating from 125µm diameter optical fiber.
Features of the CFS-3 optical stripper
- The tool does not require adjustment
- No scratches or scrapes on the fiber optic cable.
- The tool is equipped with a locking latch to lock in place
Patchcord features
- Low attenuation
- Operation over a wide temperature range
- Repeatability of measurements
- Repeatability of parameters
Usage
- FTTH networks
- LAN, WAN
- WDM systems
Pocket knife for cutting optic fibre cables
The tool can work on cables from 4.5 to 11mm in diameter: - 4.5 mm - 6mm - 7mm - 8mm - 11mm
Basic technical parameters: | |
Handle material | ABS synthetics |
Product colour | Black |
Protective insulation | Y |
Stripping capacity (max) | 1.1 |
Stripping capacity (min) | 4.5 |
Extralink Stripper - S | Buffer puller | for cable, small 1.5mm - 3.3mm
Stripper is a powerful and indispensable tool for terminating fiber optic cables. It easily cuts the sheath of a PVC cable into two parts before crimping. In both field and plant applications, this precise and innovative tool saves time and ensures consistency.
Cable sizes for processing
- 1.5~1.9MM
- 2.0~2.4MM
- 2.5~2.9MM
- 3.0~3.3MM
EXTRALINK CLEANER CASSETTE CLE-BOX
Fiber optic connector cleaning cartridge.
Contains a special microfiber cleaning tape for dry (alcohol free) ferrule fronts. Cleans very thoroughly while maintaining antistatic properties.
Features | |
Product type | Fiber Optic Accessories |
Fibre type | Microfibers |
Basic technical parameters: | |
Product colour | White |
Product type | Cleaning wipes |
Quantity per pack | 1 |
Extralink FXPB-1 | Cable drum roller | up to 200kg load
Extralink fiber optic connector cleaning tool
Extralink WUN014 is a fiber optic connector cleaning tool for cleaning the ferrule face. Special fabric removes any dirt and its antistatic properties prevent dust from settling again. The tool is used to clean connectors of both patchpanels and individually mounted adapters.
Product features
Connector type | LC |
Element to be cleaned | ferrule face |
Basic technical parameters: | |
Handle material | Plastic |
Product colour | Green, White |
Product type | Ferrule cleaner |
Weight | 40 |
Basic technical parameters: | |
Protective insulation | Y |
Stripping capacity (max) | 1 |
Stripping capacity (min) | 4 |
Basic technical parameters: | |
Protective insulation | Y |
Stripping capacity (max) | 2.8 |
Stripping capacity (min) | 8 |
Extralink FXZH-1 | Cable drum roller | up to 1,5T load
Extralink EMILY 16 CORE fiber optic box white
Extralink EMILY 16 core is the equipment used in the main fiber optic cable distribution point for client cables (in PON technology). Welds, splitter and other mounting accessories can be placed in the housing while maintaining protection and transparency of the network.
Features:
- 16 fibres can be installed
- Removable connection tray for easy installation
- Many adaptor options are available
- It accepts, among other things, distribution cables and cables with pre-clips.
- Protection against bending radius
- Removable door for easy installation
- Can supplied with 16 heat shrink welds and other components
Application:
- Data centres, premises installations, telecommunications networks
- Ethernet, fiber channel, ATM, LAN, MAN and WAN
- ICT and telecommunications networks
- Wall/post mounting
- Internal and external use
Dimensions:
Cable system:
Wall-mounted installation:
Post installation:
Basic technical parameters | |
Dimensions | 315*235*100mm |
Capacity | 16 fibres |
Adapters | 16*SC Simplex, 16*LC Duplex (not included) |
Temperature | -40°C~ 60°C |
Net weight | 1.25KG |
Gross weight | 1.35KG |
Basic technical parameters: | |
Housing material | Polycarbonate (PC) |
Mast mountable | Y |
Number of fibres supported (max) | 16 |
Number of splice trays supported (max) | 1 |
Product colour | Grey |
Suitable for indoor use | Y |
Suitable for outdoor use | Y |
Wall mountable | Y |