Twisted pair cables

RJ45 patch panels are designed to be mounted in a 19-inch rack. Each panel has cutouts into which the jacks can be mounted virtually snap together, the kits include new icon labels and plastic plastic holders that can be mounted on the front of the panels for easy port identification. Blank anodized panels can be mounted directly for easy port identification. Blank anodized can be mounted directly on 19-inch relay enclosures or EIA standard cabinets.

Surface mounted cat. 5E outlet Extralink. It is used for building subscriber points in unshielded data transmission networks which comply with ISO/IEC 11801 and EN 50173 class D, and ANSI/TIA/EIA 568 cat.5E. The outlet has been equipped with RJ-45 socket and slot connector that allows for installing network cable. The connector contains color coding that facilitates proper installation with 568A or 568B sequence. High quality materials used for manufacturing of the socket ensure its durability and proper operation.

EXTRALINK CAT5E FTP (F/UTP) INTERNAL, TWISTED PAIR, 305M Network cable F/UTP cat.5e. Package that measures 305 meters. The cable is made of pure copper and encased in HDPE sheath with diameter of 1.02mm. The cable is shielded with 0.05mm aluminum foil and has an additional grounding conductor. Outer sheath PE 0.55mm thick. The cable is designed for indoor use.

FTP Cat.5e network cable. Package containing 305m cable. The cables are made of pure copper with a thickness of 24AWG and are surrounded by a PE coating, the diameter of each cable with insulation is 0.97mm. The cable is shielded with aluminum foil, has an additional grounding conductor.

EXTRALINK CAT6 FTP Copper twisted pair cat. 6 F/UTP 4PR 23/1 water resistant cable for outdoor applications. Four pairs of twisted copper wires, colour coded, protected with waterproof tape, screened in PE sheath. The cable complies with many standards - cabling requirements of ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568-C.2 and cables IEC 61156-5, EN 50288-6-1.

Extralink Patchcord LAN network cable - length 0.5 meters This network cable from Extralink is a half-meter long gigabit copper cable, designed for indoor use. A LAN patchcord is a basic element of computer networks operating in the Ethernet standard. It is used to directly connect two active devices, such as a router or switch, so that data can be transferred between them. It is also used to connect computers or Voip telephones for structured cabling and to perform patch panels switching in IT cabinets. It is perfect for both large and small computer networks. This shielded patchcord from Extralink is highly flexible, which translates into installation convenience and user comfort.

Extralink Patchcord LAN cable - 5 meters Extralink power cable - 5 meters long copper cable for indoor use. A LAN Patchcord is the basic element of computer networks operating in the Ethernet standard. It is used to directly connect two active devices, such as a router or switch, so that data can be transferred between them. It is also used to connect computers or VoIP phones for structured cabling and to perform patch panel switching in IT cabinets. It is perfect for both large and small computer networks. This unshielded patchcord from Extralink is highly flexible, it guarantees installation convenience and comfort of use.

Surface-mounted socket 2x RJ45 RJ45 surface-mounted socket allows you to connect computers, laptops, printers, TVs, game consoles, etc. to your network. It is the perfect complement to help you install network cables or optimize your cabling. The device is compatible with CAT5E cable, which supports Gigabit Ethernet bandwidth and operates at 100 MHz.The connector contains color coding that facilitates proper installation with 568A or 568B sequence. High quality materials used for manufacturing of the socket ensure its durability and proper operation.

The patchpanel is one of the basic elements used for structural cabling. It is installed in 19" racks. The screws used for assembly are the same as for active devices. The task of the patchpanel is to terminate the cables coming down to the distribution cabinet.